REVISED TALK GROUPS
There will be several changes to talk groups affecting
TG8, TG2350, TG2351, TG2352, TG2353, UK Wide & Direct Dial
As of the 28th December 2015 the new Talkgroup structure has now been implemented. However the new regional groups will not be linked to TG8
This is to allow users time to update their code plugs and test them on the new talk groups
Talk groups TG8, TG2350, TG2351, TG2352, TG2353 & Direct Dial
are still available, but will be switched off on 31st January 2016
AS A GUIDE THE REVISED TALKGROUP LISTINGS SHOWN BELOW ARE NOW CONFIRMED AS OPERATIONAL
FOR UP TO DATE INFORMATION PLEASE SEE THE LINK UNDER THE FULL TG LIST TAB AS WELL AS AGAINST EACH REPEATER LISTING UNDER THE REPEATER TAB
Despite the talk group restructuring having been completed, there could be some “fine tuning” to be done over the next month (and beyond) as Keepers can request additions and removals. We will keep posting updates on the relevant pages on this site as well as via the Facebook page and Twitter. Also via our weekly newsletter
An update from the c-Bridge Admins
** As of 09/01/2016 the process mentioned below has now been completed and hold-off timers are now operational on all wide area talkgroups **
As promised we have started adding hold-off timers to the wide area talkgroups on Timeslot 1. This has already been implemented on the new regional 8xx groups on Slot 2.
‘Wide Area’ means TG1, TG2, TG13 and TG235. As has always been the case these 4 talkgroups will still normally be heard on all repeaters. Users can continue to use them as they always have.
If a repeater user makes a transmission on one of the user activated talkgroups (TG80, TG81, TG113, TG123, TG119, TG129) or local TG9 then the 4 wide area talkgroups will be turned off on that repeater for 10 minutes (5 minutes for TG9). This will allow a user activated or local QSO without the risk of being interrupted by the wide area groups.
The wide area talkgroups remain active and usable on all repeaters not involved in the user activated QSO. Any of the wide area talkgroups can be reconnected immediately without having to wait for the timer to expire by keying up on that talkgroup.
A similar scheme will be implemented on the slot 1 special talkgroups such as 803. TG1 and TG235 are currently working as above. TG2 and TG13 will follow shortly
TALK GROUP 8xx (ROAMING)
Repeaters will be assigned a “home” region which is always on and is based on the repeater location. Secondary regions are available as a User Activated option. The reasons for the change include (1) it allows linking of repeaters with coverage in multiple regions (2) allows for qso’s to continue should a user go into the next region subject to availability on the next repeater (3) allowing the split of regions such as SE England which has grown to big for TG8
TG800 – RESERVED FOR FUTURE USE
TG801 – METRO EAST (HERTFORDSHIRE / EAST LONDON / ESSEX / KENT)
TG802 – METRO WEST (CENTRAL & WEST LONDON / SURREY / SUSSEX)
TG810 – SOUTH WEST ENGLAND (THAMES VALLEY / BRISTOL CHANNEL / SOLENT)
TG820 – NORTH WEST ENGLAND
TG830 – MIDLANDS
TG840 – EAST OF ENGLAND
TG850 – SCOTLAND
TG860 – NORTH EAST ENGLAND
TG870 – WALES & MARCHES
TG880 – NORTHERN IRELAND
TALK GROUP 2350 – 2353 (SPECIAL LINKS)
These groups will change talk group number – their function remains the same – their new TG number basically puts them within a “regional” block
The repeater listing will show “current special links” and “revised special links”
TG803 – Replaces TG2352 (GB7AK, GB7EP, GB7EX, GB7HR, GB7IK, GB7LO, GB7NS & GB7SE)
TG821 – Replaces TG2350 (GB7HM, GB7FW & GB7LP)
TG822 – Replaces TG2353 (GB7BR, GB7CA & GB7PN)
TG841 – New Talkgroup (GB7DS & GB7MK)
TG862 – No change to this talk group (GB7HS, GB7HX, GB7LE, GB7MR & GB7TD – M62 MOTORWAY)
TG871 – Replaces TG2351 (GB7HM & GB7PN)
UK ONLY USER ACTIVATED UK WIDE
To help with nation wide QSO’s especially as direct dial is suited for one to one QSO’s, two UK Wide User Activated talk groups are being implemented.
TG80 – UK Wide User Activated 1
TG81 – UK Wide User Activated 2
DIRECT DIAL (TG901 – TG940)
All direct dials will be removed from the network as part of the change and the UK Only User Activated Talk Groups can be used in it’s place.
USER ACTIVATED TALK GROUPS
The c-Bridge admins are working to add “hold off timers” which will assist users of these talk groups to hold on to the talk groups by inhibiting the other talk groups from taking the slot if the User Activated Talk Group is in use on a repeaters. This will be a new function that will be worked on to make using the UA talk groups easier for all.
CC-3 dot NETPaul L | MØFOX | Chesterfield UK | IO93HE | Icom IC-7800 | Yaesu FT-980 | FT-902DM | WAB SK46