Antenna analyzer built-in battery can connect with PC, Iphone, Android phone through USB or bluetooth.It is easy to set up the antenna for its light weight. It can test 2 days under the condition of ful electricity without shutdown.It not only can test the antenna standing wave ratio, impedance and reflection coefficient, pattern, but also the attenuation of the cable, barron, filter frequency response curve and the small signal amplifier gain and frequency response.

SPECIFICATION
Output frequency range:1-35MHz(HF)
Micro Power Meter input signal frequency range:0.1 – 500MHz
RF Output power:2dBm<Po<3dBm
RF Input power range: -75dBm to +15dBm
Frequency stability :5ppm
Impedance test accuracy: Smith Chart 1/3 radius +/-10%
Smith Chart 1/3-2/3 radius +/-35%
Smith Chart 2/3 Outside radius qualitative analysis area
Standing wave ratio measurement precision: +/-5%
Power measurement accuracy: +/-3dB at 3dBm to 15dBm
+/-1dB at -20dBm to 0dBm
+/-6dB at -40dBm to -90dBm
Gain measurement precision: +/-1.1dB at 0dB
Battery time：>24 hour
Battery capacity:>3000mAh
Antivibration design：Affordable 3 shaft vibration magnitude 6g
Temperature range：-5 to 45℃
Low temperature start:<0℃
Resistance to temperature shock:>5℃/s
Dimension:200mm(L)x100mm(W)x35mm(H)
Weight:0.9Kg(2Lb)
RF interface: BNC(50ohm)
Communication interface: USB Slave-12mmX10mm & Bluetooth 2.0
Software platform: Windows XP/Windows7/Windows8/Android2.0-5.0
FUNCTION
(CAT)Analysis function of antenna and cable
Measure the reflection of antenna; Voltage standing wave ratio (VSWR) ;Impedance
Measurement cable loss
(VNA) Two-Port network S11 phased and magnitude,S21 Gain
Measure filter or amplifier’s input return loss, input impedance
Measure filter or amplifier amplitude-frequency response
(VVM)RF Dynamometer
Measurement of the input signal power

Paul L | MØFOX | Chesterfield UK | IO93HE | Icom IC-7800 | Yaesu FT-980 | FT-902DM | WAB SK46