Designed to enhance any serious operators shack, this rack-mounted unit offers exceptional sound quality and large,
easy-to-use controls. The RCI-2995DX has features that include : AM-FM-CW-SSB modes of operation,
variable power, noise blanker and build in heavy duty AC power supply and provides 150W PeP output,
a rear panel frequency meter output for measuring transmit operating frequency and now with build in fan kit.

Dual panel meters display received signal strength transmitter power output and antenna SWR.
Clarifier audio tone controls for accurrate receiver tuning improved reception under difficult conditions.
Pushbutton selection of programming scanning functions, and programmable repeater split for FM operation
enchances the renewed 10 meter repeater activity.

The RCI-2995DX offers microprocessor-based advanced features typically found in high-end units costing several
times as much, including programmable repeater offset and receiver scanning for quick search of active frequencies.
The unit offers three methods of frequency selection, non-volatile memory to store and scan up to ten
favorite frequencies, scanning of selected frequency segment or stored frequencies and front
panel frequency selector lockout.

In addition, the RCI-2995DX offers an impressive array of design and performance improvements:
An improved receiver : designed for increased sensitivity and image rejections.
A double FET balanced mixer : for improved receiver inter-modulation rejection.
Surface mount components : for increased resistance to shock and vibration.

Features:
10 & 12 meter bands
Large frequency display with dimmer control
Improved receiver design
New green back light display
Variable output power control
Active frequency scanner
Ten programmable frequencies
Programmable repeater split
Receiver clarifier(+/- 0.5KHz)
Dual panel meters
Noise blanker/ANL circuitry
Frequency selector lockout
Continuous duty build-in AC power supply
shipping weight — 30 pounds
AM/FM/CW/SSB Base station
100W ++ PeP transmit output power
Volume, SQ, Mic gain, RF gain control
Frequency step adjust : 100Hz, 1KHz, 10KHz, 100KHz, 1000KHz, 10,000KHz
Roger Beep
SWR indicator
ANL, NB

New version colour LED display and 25 watts PeP AM mod / 25 watts SSB

Ranger Communications once again sets the performance and reliability standard for entry level
amateur mobile transceivers with the latest generation of our popular RCI-2950DX/70 series
of cost effective, multi mode, high performance transceivers.
Introducing the new RCI-2950DX & RCI-2970N2. These new models feature microprocessor control
of not one but two amateur bands. The new RCI-2950DX, rated at 25W PEP and the RCI-2970N2,
rated at 200W PEP are perfect for the recent band openings on 10 and 12 meters.
Now you can upgrade your mobile Ham capabilities with a radio that is rich in features and reasonable in cost.

The new models have retained the operating features of its popular predecessors,
including programmable repeater offset for repeater activity on 10 meters
and receiver scanning for quick search of active frequencies. The units offer three methods
of frequency selection, non-volatile memory to store and scan up to ten favorite frequencies,
and front panel frequency selector lockout

In addition, the DX Series offers an impressive array of design and performance improvements:

Features:
– new update large LED display for easy reading in a wide range of light conditions
– Modes: AM/FM/USB/LSB/CW
– Variable power output control, adjusts your deadkey power
– An improved receiver designed for increased sensitivity and image rejections.
– A double FET balanced mixer For improved receiver intermodulation rejection.
– New power supply protection, temperature compensation for improved stability and reliability over wide temperature ranges.
– 4-level brightness adjustment
– Extremely stable single sideband USB & LSB mode
– 10 & 12 Meter bands allows you to receive and transmit on these popular amateur frequency bands.
– Receiver Clarifier (0.5kHz), allows you to adjust your receive frequency.
– Noise Blanker/ Automatic Noise Limiter Reduces extra static and receive noise.
– Programmable repeater offset allows you to offset your frequency for FM repeater use.
– Active frequency scanner Scans through to find active frequencies.
– Ten programmable frequencies Program in your most monitored frequencies for easy access.