Yaesu DR-1XE FM/C4FM relay 2m / 70cm

Yaesu offers you the dual mode repeater

Yaesu DR-1XE

Yaesu DR-1XE

for a smooth transition from traditional FM mode to digital C4FM modulation. This relay is capable of both operation modes, the automatic mode select (AMS) recognizes the signal as C4FM digital or conventional FM and then the DR-1XE repeater retransmits the signal using the preset communications mode. This makes operating in FM as well as C4FM with only one relay possible.

The DR-1XE relay is shipped as a professional 19″ system, an extrnal power supply (13.8V, 15A) is required. The repeater can be used either on 2m (144-146MHz) or 70cm (430-440MHz). Programming is done very comfortably via a large, coloured touch display on the front. With that you can program ‘Id’ (call sign), transmission and receiving frequency, transmission power (5, 20 or 50W), CTCSS, squelch and the automatic modulation select (AMS). Frequencies can be adjusted in 5 or 6.25kHz steps.

The device requires 13.8V, max. 15A for operation. The DC cable is included. The repeater has an internal loudspeaker for local checking, also a microphone can be plugged in for testing the transmitter.

Yaesu DR-1XE Repeater rear sideZoom
The DR-1XE repeater has no diplexer built-in, but needs be added externally. On the rear side there are separate connectors for transmission and receiving antenna available. The transmission power can be adjusted to 5, 20 or 50W. The relay identifier can be transmitted via voice or CW output in adjustable time intervals to meet regulatory requirements for automatic operating units.

DR-1XE includes in delivery:
DR-1XE relay in a 19″ chassis
DC cable
English manual
SCU-20 PC-ACC cable (USB)

Paul Leicester | MØFOX | Chesterfield UK | IO93HE | Yaesu FTDX1200

Kenwood TS990S HF Transceiver

Kenwood TS990S HF Transceiver

The Kenwood® TS-990S featuring a dual TFT display and dual receiver covers the HF amateur bands plus 6 meters. It also features narrow-band roofing filters on the main receiver in a full down-conversion configuration. The TS-990S achieves the highest basic reception performance of any radio in the TS series, through the careful selection of circuits, components and accelerating analysis using triple DSP configuration. RF power is adjustable from 2 to 200 watts. This radio features a built-in automatic antenna tuner and built in AC power supply. It has a serial port, USB ports and Ethernet port.

TS-990S_front TS990S_rear_GER


Kenwood TS990S HF Transceiver

Paul Leicester | MØFOX | Chesterfield UK | IO93HE | Yaesu FTDX1200