Yaesu FTDX-9000 HF/50Mhz

ft9000_frontThe FTDX-9000 is a ground breaking HF/50 MHz Elite Class Transceiver from the YAESU Engineering Team. Previewed at the Dayton Hamvention® in May, 2004, the FTDX-9000 features unmatched close-in dynamic range, flexible selectivity choices due to its advanced 32-bit DSP filtering, a high-resolution TFT display, and high power: the 200-Watt “D” (Deluxe, fully equipped) and “Contest” (custom configurable) versions, as well as the 400-Watt “MP” version, are all available now!

Now includes additional features of PEP9000-Performance Enhancement Program

Advanced 32-Bit IF DSP
The FT DX 9000 utilizes a 32-bit floating-point IF Digital Signal Processing system to provide a wide range of interference-suppression and intelligence-recovery features. Included are Variable IF Bandwidth with preset “Narrow” settings, IF Shift, Digital Noise Reduction, and a Parametric Equalizer “Contour” system for enhancing or suppressing sections of the IF passband. On transmit, the bandwidth is adjustable, and the SSB voice parameters may be precisely adjusted using the Three-Band Parametric Equalizer system.
200 Watt and 400 Watt Versions
The FT DX 9000 “D” and “Contest” versions provide 200 Watts of power output, with an internal power supply, while the FT DX 9000MP provides a whopping 400 Watts of power output (the power supply is external on this model). All versions provide continuous adjustment of the PA Bias Level from the front panel, with real-time metering of the bias level and heat sink temperature, for adjustment of the operating conditions between Class AB and Class A. Class A output on the MP version is 100 Watts, while it is 75 Watts on the D and Contest versions during Class A use.
YAESU Exclusive: Full Duplex (for One-Radio SO2R Operation!)
The FT DX 9000 is the only Amateur HF Transceiver to provide Full Duplex capability when operating on two different bands. So, in a contest, you can be calling CQ on 10 meters while simultaneously receiving on 20 meters, looking for new multipliers! This unique capability is found only on the FT DX 9000!
Large (6.5-inch) Multi-function TFT Display
The FT DX 9000D’s 6.5″ TFT display provides a host of operating status and station-management information. Included are a World Map with Sunrise/Sunset/Grey Line display, Logbook, Swept SWR across the band, PA Bias Level, PA Heat Sink Temperature, PA Voltage, Real-Time SWR, Memory Channel listing, Menu listing, and (when using YAESU rotators) indication of the rotation direction and rotation speed, along with presets. A responsive, high-resolution Spectrum Scope lets you watch activity on the band, with custom span and center frequency presets available via the Menu. And, on the rotator page, use your keyboard (not supplied) to input your Latitude and Longitude, and the FT DX 9000 will draw a Great Circle Map of the world, centered on your location! There’s also an “Oscilloscope” page, showing TX/RX waveforms as well s a “waterfall” display for weak-signal digital work.
Three Roofing Filters for Outstanding Close-In Dynamic Range
The FT DX 9000 provides three “Roofing” filters in the first IF, allowing you to select (on the fly, or automatically by mode) front-end bandwidths of 15 kHz, 6 kHz, or 3 kHz. Choose the bandwidth that best matches the band occupancy and your operating mode at the time!
Leading-Edge Receiver Performance
The receivers in the FT DX 9000 are crafted using an ultra-quiet 400 Mhz High-Resolution DDS local oscillator, for extraordinarily low noise close to the carrier. The high-level mixers and robust IF amplifier stages are designed to yield a 3rd-order Intercept Point in excess of +40 dBm, your assurance of high performance on today’s crowded bands.
Parametric Microphone Audio Equalizer
Another unique FT DX 9000 feature is the 3-band Parametric Microphone Equalizer, independently adjustable for the front panel (XLR) and rear panel (8-pin round) microphone connectors!

The Parametric Equalizer system allows the operator to tailor the transmit passband more precisely than with other equalizer systems. You can adjust the center frequency of each of the three audio passbands, the width of each of these bands, and the amount of boost or suppression you wish to engage within each of these frequency ranges. This allows you to focus available power where you want it, and maximize fidelity according to your voice pattern and the response of your microphone.

And because you can adjust the front and rear microphone jacks independently, you can equalize one way for a “DX” mic element on the rear panel, and equalize differently for a “studio” microphone on the front panel mic jack!

CC-1XLR-Y8 Heil Yaesu Cable

cc-1k-big__14763_1410111334_1280_1280 cc-1-xlr

CC-1XLR-Y8 Heil Cable for 3-pin XLR Microphones and Yaesu 8-pin round

Cable for mics with 3-pin XLR connections and Yaesu 8-pin round. Has 1/4in jack socket for external PTT, for optional HS-1 hand or FS-2 foot switch. Suitable for PR-20 Studio Mic, G-PRO Gold line Pro, HCLP Classic Pro, HHSM Heritage Studio and the HM-PRO PLUS.

Allows direct mic connection for a Rode Procaster, Heil PR40 and other balanced mics direct to the transceivers mic socket or via an audio mixer.


HEIL / CC-1XLR-Y8 Heil Cable for 3-pin XLR Microphones and Yaesu 8-pin

Available from www.radioworld.co.uk

Yaesu FTDX1200HF/50MHz Transceiver

ftdx-1200_radioaficion-14 FTDX1200_front_ss shaq2 shaq1

Yaesu FT DX 1200 HF/50 MHz 100W Transceiver

The NEW FT DX 1200 Transceiver is the latest addition to the Yaesu family of fine Amateur Radios, incorporating an up converion design with sharp edged crystal roofing filter technology at 40.455 MHz These features provide outstanding receiver performance which is a heritage from the FT-DX5000.

The built in 4.3″ TFT wide screen format full colour Hi Resolution Display with a wide viewing angle with many selectable information sources provides superior operatbility and visibility for the FTDX1200 user. A RF spectrum scope located at the bottom of the display give the operatior all the information needed to complete that contest QSO.

An Optional FFT-1 module which is installed inside the radio supports advanced functionality, including the AF-FFT Scope,  RTTY/PSK-31 Encode and Decode,, CW Decode and CW Auto/Zero-in option to ensure you are spot on the frequency for the next QSO.

Additional optional accessories offer desirable additional features that make the FTDX1200 a truly flexible high performance platform for all hams.

FT DX 1200 Brief Description
Rugged 100W Output Power on HF and 6M – SSB/CW/AM/FSK

A Highly balanced receiver circuit inheriting the design concepts of the Yaesu FT DX series

Triple Conversion circuit confiuration implements optimized gain distribution

Receiver front end Blocks powerful out of band signals using 8 band pass filters.

IPO functions allows selection of the optimium RF Amplifier circuit configuration for each noise and signal circumstance

IPO    RF characteristics substantially improved by feeding the signal directly into the mixer
AMP1  The most common configuration feeds the signal via one RF amplifier for  improved sensitivity
AMP2  Cascades both RF AMP1 and AMP2 in series when sensitivity & gain on the higher bands is considered essential.

Roofing Filters for 15KHz, 6KHz and 3KHz fitted before the 40.455MHz 1st IF.
The 3KHz roofing filter is very effective at attenuating interfering signals. Sharp 4 element MCF’s are fitted with excellent
distortion characteristics. By incorporating a 3KHz narrow roofing filter before the 1st IF stage strong out of band interfering signals have been sufficiently attenuated, thus reducing the burden on the later stages and improving adjacent multi signal handling characteristics.

Highly Stable, High quality local oscillator signal injected into the 1st IF Mixer
The local oscillator signals are derived from an highly accurate TXCO and high resolution DDS adn PLL local oscillator
configuration. Standard Fundamental oscillator is fitted with a ±0.05 ppm TXCO Excellent frequency Stability across a wide temperature range.

Acclaimed IF DSP is powerful, versatile and effective in real time operation
Using 32bit high speed floating point DSP processor TMS320C6727B by Texas Instgruments similar to the one used in the FTDX-5000 and FTDX-3000 series. This 300MHz DSP processor directly applied to the 30KHz 3rd IF provides high QRM rejections perofrmance for hte actual signal through the acclaimed superior Yaesu algrothyms.

Contour, Digital Noise Reduction (DNR), IF notch funcitons
Standard Yaesu DSP functions for Contour, DNR and Notch functions provide the tools necessary for ensuring the best signal can be received by tailoring the audio response, reducin noise and by notching frequencies at the IF.

Final Amplifier supplies high quality stable high output.
The final amplifier using two RD100HHF1 MOSFETS in a push pull configuration delivers a consistent 100W and can deliver superb high quality emissions with little distortion and fewer spurious and other unwanted signals.

High Speed Automatic Tuner includes 100 memory channels
The FTDX1200 Antennae Tuner is a digital controlled tuner switching L and C component to provide a match between the antenna and the radio. Tuning data is automatically stored in the tuner 100 channel memories and automatically recalled as the radio is tuned across the band for the best matching point at that frequency.

Parametric Amplifier for superior audio quality on Transmit.
The Modulation circuit utilizes digiral variable modulation through DSP, thus raalising idela superios trnsmission quality. An incorporated equalisation funciton allows for transmission singal bandwidth adjustment and various adjustments relating to transmission audio quality.

Two receiver compatible Antenna connectors.
The two antenna connectors allows for complex aerial configurations for contest and DX working where seperate aerials for RX and TX are required and can be quickly and easily selected  by pushing a button on the front panel. The current configuration is shown on the TFT screen at all times.

Huge TFT full Colour Display
Superior panel layout is a characteristic of Yaesu transceivers and the display of the FTDX1200 is no exception to this.Considerable design effort has been expended to provide an easy user experience when using the FTDX1200. The most important meters during communication and frequency examination are displayed in the  central area with the various
transmission and reception function displays arranged around that. Everything is in direct view and the effects of any operation can be visually confirmed, thus allowing stress-free concentration when operating for long periods of time.
Graphic display enabling intuitive QRM rejection
Choose between an Analogue meter display or Digital Bar Graph Meter display
Display of Transmitting and Receiving status and basic VFO-A and VFO-B settings.
ASC (Automatic Scope Control) Standard automatic sweeping high speed spectrum scope in line with dial operation.
Cursor Keys make operation selection easy.
Block Diagram displaying the receiving signal flow without change

Main Dial with Variable Torque Adjustment
Rotating the outer ring of the main dial whilst holding the dial steady increases or decreases the rotational torque needed to move the dial giving the operatior the instant adjustments to match their preferred preference.

µTuning Kit for super sharp selectivity in the 160m, 80/40m and 20m bands are supported by the FTDX1200

For the CW enthusiast
CW Zero-in Display
CW APF ( Audio Peak Filter)
Seperate CW jacks Front and Rear
Electronic keyer with memory and autoincrementing serial number function with FH-2 optional keypad.
CW Spot feature and more

CS Key function. Programmable function key for quick access to specific menu setting.


Yaesu FT DX 1200 HF/50MHz Transceiver

Yaesu FT1000MP tutorial 3

The Yaesu FT-1000MP introduced Enhanced Digital Signal Processing (EDSP) providing an impressive array of noise-reduction and interference rejection filters never before available in the communications industry. Mindful of the critical need to preserve signal-to-noise ratio and IF skirt selectivity throughout the receiver, Yaesu engineers have retained the wide variety of IF filters and high intercept front-end that made the FT-1000D a best seller. Using this RF/IF design as a foundation and the FT-1000MP’s EDSP system and Collins Mechanical Filter, the result is a uniquely clean sounding transmitter, with outstanding receiver performance. The Quad conversion receiver covers 100 kHz to 30 MHz. RF output is adjustable to 100 watts [25W AM] in SSB/CW/AM/FM/AFSK modes. The supply voltage is 90~129/180~258 VAC or 13.5 VDC 19 amps.

Yaesu FT1000MP tutorial 3